In Craft Mode, you can edit the Height Map directly in the editor to control the raised details of your 2.5D UV print.
A Height Map is a grayscale image that determines the buildup height of different areas:
- Brighter areas produce greater buildup and print higher.
- Darker areas produce less buildup and print lower.
- Pure black areas have no buildup.
Custom Height Map Editing provides two ways to adjust the result:
- Global adjustments: Modify the overall height distribution of the entire Height Map.
- Brush adjustments: Fine-tune specific areas using local editing tools.
This guide explains what Height Map Editing does, where to access it, and how to use both editing methods effectively.
Height Map Editing allows you to directly modify the grayscale image that controls the buildup height of your print.
You can use it to:
Instead of exporting the Height Map to external image-editing software and importing it again, you can complete the entire editing process within Craft Mode.
There are two ways to open Height Map Editing, depending on your workflow.
Use this method when you already know which object you want to edit.
This method is useful when you want to edit a specific image without first reviewing all layers.

Use this method when you want to review the complete 3D result before selecting a layer to edit.
This method is useful when your design contains multiple layers and you want to inspect the overall result before editing a specific layer.

Height Map Editing includes two types of controls:
The preview updates in real time, allowing you to see how each adjustment affects the expected raised print result.

Global adjustments affect the entire Height Map.
Use them when the overall relief appears too flat, too strong, too shallow, or unevenly distributed.
The available controls are:
Brightness adjusts the overall brightness of the Height Map.
Use this control when the entire design appears generally too high or too low.
Contrast adjusts the difference between lighter and darker areas.
Use this control when you want either a stronger relief effect or more gradual surface transitions.
Highlights adjusts the brighter areas of the Height Map.
Use this control when you want to emphasize or soften the highest parts of the design.
Shadows adjusts the darker areas of the Height Map.
Use this control when you want to raise or deepen the lower areas of the design.
Gamma adjusts the distribution of midtones in the Height Map.
Use this control when the main raised shape appears too broad or too narrow.
Brush tools allow you to edit specific areas of the Height Map.
They are useful when only part of the design needs adjustment, such as when you want to:
The available brush tools are:
The Dodge tool brightens the painted area.
Because brighter areas print higher, Dodge increases the local buildup height and makes the selected area more raised.
Use Dodge when you want to increase the height of a specific area.
The Burn tool darkens the painted area.
Because darker areas print lower, Burn reduces the local buildup height.
Use Burn when you want to reduce the height of a specific area or deepen a lower region.
The Flatten tool removes the existing height variation from the painted area.
Areas edited with Flatten are changed to no buildup.
Use this tool when you want to remove unwanted raised details or completely flatten selected regions.
When using Dodge, Burn, or Flatten, you can adjust the behavior of the brush using the following settings.
Brush Size controls the area affected by each brush stroke.
Use a smaller brush for edges, text, and fine details. Use a larger brush for broad surfaces.
Strength controls the intensity of each brush stroke.
Use a lower Strength when you want to build up the effect gradually.
Hardness controls how sharp or soft the edge of the brush is.
Use a lower Hardness when you want the edited area to blend naturally into the surrounding surface.
If you are unsure where to begin, use the following workflow:
Starting with global adjustments is generally faster and provides more consistent results than attempting to complete the entire edit using brush tools alone.
When you enter through Preview, the full-screen page initially opens in Global Preview.
In Global Preview, you can:
After selecting a layer, click Go to Advanced Edit to begin detailed Height Map editing.
This workflow allows you to move from reviewing the overall design to precisely editing an individual layer.

Height Map Editing includes standard editing controls to help you manage your adjustments.
You can undo or redo recent actions while working on the full-screen editing page.
Supported actions include:
Click Reset to restore the Height Map to its original state for the current editing session.
Use Reset when you want to discard all current adjustments and begin again.
Changes are saved automatically. There is no manual Save button.
Auto-save is triggered shortly after actions such as:
This allows you to continue editing without interrupting your workflow.
When you click Back and return to the canvas, your changes have already been saved.
When you finish editing and click Back, all changes made on the full-screen editing page are preserved.
Although you may have made several individual adjustments, they are grouped into a single completed editing action when you return to the main canvas.
This keeps the editing history on the main canvas simpler and easier to manage.
Custom Height Map Editing is particularly useful when you want to:
Height Map Editing gives you direct control over how buildup height is distributed across your UV print.
With this feature, you can: