The printer reports error code 0xFD011F0003 (Total 24V Overcurrent Error) in the eufyMake App or eufyMake Studio.
Identify what operation was being performed when the error occurred.
If the error occurred while unlocking the Flatbed with the printer powered on, the error is likely a false alarm caused by the current software version.
Restart the printer and check whether the error appears again.
If the error persists, verify that both the power adapter indicator and the printer power indicator are illuminated normally.
If the issue is not resolved, upload the printer logs and contact eufyMake Customer Support for further analysis.
If the error occurs during a different operation and is not related to unlocking the Flatbed, it may indicate a hardware issue. Please contact eufyMake Customer Support for further troubleshooting.
If the issue persists after completing the above steps, please contact eufyMake Customer Support at support@eufymake.com with the following information:
Printer SN. Please refer to:Check sn
Printer and App Logs. Please refer to: Log Upload
Relevant photos and videos.