The cleaning ink cartridge contains built-in cleaning fluid and moisturizing fluid and also serves as the waste ink storage tank of the printer.
Figure 1. Cleaning cartridge facing the outside of the machine
Figure 2. Cleaning cartridge facing the inside of the machine
Note: To ensure print quality, the cleaning cartridges for this machine are dedicated products, not compatible with other third-party accessories.
The cleaning cartridge/waste ink tank is located on the right side of the printer.
Remove the cover by pulling it outward.
The cleaning cartridge is tightly fitted inside the printer without screw fixation. Apply light force to loosen it and pull it outward to remove it.
Hold the upper and lower ends of the cartridge and gently pull it to release. It can be removed without any additional tools.
Align the cartridge interface vertically toward the inside of the printer and press the new cleaning cartridge into place.
Align the corresponding interface with the column head at the corresponding position according to the corresponding interface, and gently press it in.
Ensure that the new cleaning cartridge fits flat against the inner wall of the printer.
Used cleaning cartridges should be disposed of through dedicated and legally compliant measures. Do not discard them casually. Please refer to the disposal method for cartridges./https://wiki.eufymake.com/en/waste-ink-cartridge-cleaning-cartridge-disposal-guide
After replacing the cleaning cartridge, run a cleaning cycle to confirm the new cartridge is correctly installed.
If you need any assistance, please contact customer service: support@eufymake.com